EWS EMULATOR FOR BMW

Rp300.000

EWS EMULATOR FOR BMW

Item: EWS EMULATOR- EWS 2 EWS 3.2 EMULATOR For BMW
INSTALLATION:
1. Remove original EWS2 control unit, find +12v ACC, GND, K-line wires, attach emulator. Emulator must be in service mode: JUMPER 1 shorted.

Categories: ,

Description

EWS EMULATOR FOR BMW

Item: EWS EMULATOR- EWS 2 EWS 3.2 EMULATOR For BMW
INSTALLATION:
1. Remove original EWS2 control unit, find +12v ACC, GND, K-line wires, attach emulator. Emulator must be in service mode: JUMPER 1 shorted.
2. Connect ANY K-line diagnostic adapter to vehicle diagnostic connector and l- aunch EMULATOR
3. Choose COM port, write in desired ISN number, press button Store. Or –
4. For some ECU s it is possible to read ISN number directly from engine control unit. In this case select option “ECU xxxxx”, press Read. Software will try to read ISN. If successful, choose option “EWS emulator” and press button Store to save ISN number into emulator.
5. Disconnect emulator from K-line, remove JUMPER 1 and connect K output from emulator to
DME(DDE) <-> EWS line.
6. Don’t forget to short two starter relay wires (EWS connector)!
7. Car is ready to start.

kita semua tahu bahwa permainan gim online yang dinanti akan segera hadir disitu utama kita untuk para pemain dan penikmat permainan agen sbobet terbesar dan terunik di indonesia tercinta ini

lagi pula kita harus mempersiapkan semua nya dengan matang agar kita dapat dengan mudah bermain tebak angka di agen togel yang dimana kita semua tahu itu tidak mudah untuk di cerna

Obd2 Jatim © 2018